Scale (Filter Scale); Break Point; Cutoff Offset - Yamaha Montage 7 Reference Manual

Reference
Performance

Scale (Filter Scale)

From the Filter Scale display you can set parameters related to Filter Scale for Elements.
"Filter Scale" controls the Filter Cutoff Frequency according to the positions of the notes on the keyboard.
[PERFORMANCE]  [EDIT]  Part selection  Element selection  [Filter]  [Scale]
Operation
Break Point 1 – 4
Determines the four Break Points by specifying the respective note numbers.
Settings: C -2 – G8
NOTE Break Points 1 to 4 will be automatically be arranged in ascending order across the keyboard.
Cutoff Offset 1 – 4
Determines the offset value to the Cutoff Frequency at each Break Point.
Settings: -128 – +127
NOTE Regardless of the size of these Offsets, the minimum and maximum Cutoff limits (values of 0 and 127,
respectively) cannot be exceeded.
NOTE Any note played below the Break Point 1 note results in the Break Point 1 Level setting. Likewise, any note
played above the Break Point 4 note results in the Break Point 4 Level setting.
NOTE For information on setting examples for Filter Scaling, see the Synthesizer Parameter Manual PDF document.
MONTAGE Reference Manual
Edit
Normal Part (AWM2) Drum Part
Search Utility
Normal Part (FM-X)
Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
107