Yamaha Montage 7 Reference Manual page 152

Reference
Performance
Control
Control Assign
[PERFORMANCE]  [EDIT]  PART [COMMON]  [Control]  [Control Assign]
Operation
Same as the Element Common Edit parameters for Normal Parts (AWM2)
following parameters.
Destination
When "Source" is set to "AsgnKnob 1 – 8," "Part 1 – 16 Assign 1 – 8" are added as this parameter values.
In this case, "Curve Type" and "Curve Ratio" are not selectable.
Settings: See the "Control List" in the Data List PDF document.
Source
When "Destination" is set to "Part 1 – 16 Assign 1 – 8," only "AsgnKnob 1 – 8" can be set for this parameter.
Settings:
AsgnKnob 1 – 8, MS Lane 1 – 4, EnvFollow 1 – 16, EnvFollowAD, EnvFollowMst
MONTAGE Reference Manual
Edit
Normal Part (AWM2) Drum Part
Search Utility
Normal Part (FM-X)
(page 89), except for the
Live Set
Common/Audio
Common/Audio Edit
Common/Audio
General
Audio In
Mixing
Routing
Ins A
Ins B
EQ
Motion Seq
Common
Lane
Control
Control Assign
Control Number
Effect
Routing
Variation
Reverb
Master FX
Master EQ
152