Yamaha Montage 7 Reference Manual page 173

Reference
Performance
Blur (Blur Switch)
When any display is selected, the display previously selected is blurred. This parameter determines
whether the Blur function is turned on or off.
Settings:
Off, On
Beep (Beep Switch)
Determines whether the beep sound (that confirms operations, menu/parameter selection, etc.) is turned
on or off.
Settings:
Off, On
Knob Flash (Super Knob LED Switch)
Determines whether the flashing function of the Super Knob is turned on or off.
Settings:
Off, On
KnobBrightness (Knob Brightness)
Controls the brightness of the lighting of the Super Knob.
Settings: 0 – 128
Half Glow (LED Half Glow Brightness)
Controls the dimming of the button lamps.
Settings:
Off, 1/4, 1/2
Calibrate Touch Panel
Calls up the Calibration display for the Touch Panel. Calibration of the touch panel may be necessary if the
touch panel does not respond correctly.
Initialize All Settings
Initializes all system settings you created on the Utility display.
Initialize User Data
Initializes User data (Performance, Motion Sequence, and Live Set) in the specified area of the User
memory and system settings you created on the Utility display.
Initialize All Data
Initializes all User data in the User memory and all system settings you created on the Utility display.
When the Initialize operation is executed, all target data and system settings you created will be erased. Make
sure you are not overwriting any important data. Be sure to save all important data to your USB flash memory
device before executing this procedure.
MONTAGE Reference Manual
Edit Search Utility Live Set
Uitlity
Settings
Sound
Quick Setup
Audio I/O
MIDI I/O
Advanced
System
Contents
Load
Store / Save
Data Utility
Tempo Settings
Effect Switch
173