Yamaha Montage 7 Reference Manual page 181

Reference
Performance
Mode (Click Mode)
Determines the click sound (metronome) that is used during recording or playback.
Settings: Off, Rec, Rec/Play, Always
Off:
The click will not sound.
Rec:
The click will sound during Song recording only.
Rec/Play: The click will sound during Song recording and playback.
Always:
The click will always sound.
Precount (Click Pre-count)
Determines the number of count-in measures provided before recording actually starts after pressing the
[R] (Play) button while the Song recording.
Settings:
Off (Recording starts as soon as the [R] (Play) button is pressed), 1meas – 8meas
NOTE Since the click sound is created with the internal tone generator, using click playback affects the overall
polyphony of the instrument.
Volume (Click Volume)
Determines the click sound volume.
Settings:
0 – 127
Beat (Click Beat)
Determines which beats the metronome click will sound.
Settings: 1/16 (16th notes), 1/8 (8th notes), 1/4 (quarter notes), 1/2 (half notes), Whole (whole notes)
Type (Click Type)
Determines the click sound type.
Settings:
1 – 10
Sync Quantize (Sync Quantize Value)
Determines the actual timing at which the next Arpeggio playback starts when you trigger it while the
Arpeggio of multiple Parts is played back. When set to "off," the next Arpeggio starts as soon as you
trigger it. The displayed number indicates the resolution in clocks.
Settings:
Off, 60 (32nd note), 80 (16th note triplet), 120 (16th note), 160 (8th note triplet), 240 (8th note), 320 (1/4 note triplet),
480 (1/4 note)
Click Out (Click Output Select)
Determines the specified output for the "Click."
Settings: MainL&R, AsgnL&R, USB1&2...USB29&30, AsgnL, AsgnR, USB1...USB30
MainL&R:
Outputs in stereo (two channels) to the OUTPUT [L/MONO]/[R] jacks.
AsgnL&R: Outputs in stereo (two channels) to the ASSIGNABLE OUTPUT [L]/[R] jacks.
USB1&2...USB29&30:
AsgnL:
Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [L] jack.
AsgnR: Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [R] jack.
USB1 – 30: Outputs in mono (Channels 1 – 30) to the [USB TO HOST] terminal.
MONTAGE Reference Manual
Edit
Outputs in stereo (Channels 1&2 – 29&30) to the [USB TO HOST] terminal.
Search Utility Live Set
Uitlity
Settings
Sound
Quick Setup
Audio I/O
MIDI I/O
Advanced
System
Contents
Load
Store / Save
Data Utility
Tempo Settings
Effect Switch
181