Yamaha Montage 7 Reference Manual page 75

Reference
Performance
Unit (Part Unit Multiply)
Adjusts the Arpeggio playback time. By using this parameter, you can create a different Arpeggio from the
original one.
Settings:
50%, 66%, 75%, 100%, 133%, 150%, 200%, 266%, 300%, 400%, Common
200%: The playback time will be doubled and the tempo is halved.
100%:
The normal playback time.
50%:
The playback time will be halved and the tempo doubled.
Common: The value set in the Unit Multiply common to the all Parts will be applied.
Swing
Delays notes on even-numbered beats (backbeats) to produce a swing feel.
• +1 and higher: Delay the Arpeggio notes.
• -1 and lower: Advance the Arpeggio notes.
• 0: Exact timing as set by "Arpeggio/Motion Sequencer Grid" Value, resulting in no swing.
Judicious use of this setting lets you create swing rhythms and triplet feels, such as shuffle and bounce.
Settings:
-120 – +120
Velocity Limit (Arpeggio Velocity Limit)
Determines the minimum and maximum Velocity values in which the Arpeggio responds. Each Arpeggio
will only sound for notes played within its specified velocity range. If you first specify the maximum value
and then the minimum value, for example "93 to 34," then the Velocity range covers both "1 to 34" and "93
to 127."
Settings: 1 – 127
Note Limit (Arpeggio Note Limit)
Determines the lowest and highest notes in the Arpeggio's note range. Each Arpeggio will only sound for
notes played within its specified range. If you first specify the highest note and then the lowest note, for
example "C5 to C4," then the note range covers both "C-2 to C4" and "C5 to G8."
Settings:
C -2 – G8
Octave Shift (Arpeggio Output Octave Shift)
Shifts the pitch of the Arpeggio up or down in octaves.
Settings:
-10 – +0 – +10
Octave Range (Arpeggio Octave Range)
Specifies the maximum Arpeggio range in octaves.
Settings: -3 – +0 – +3
MONTAGE Reference Manual
Edit
Normal Part (AWM2) Drum Part
Search Utility
Normal Part (FM-X)
Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
75