Yamaha Montage 7 Reference Manual page 79

Reference
Performance
Common Arp Gate Time (Common Arpeggio Gate Time)
Determines the Gate Time Rate (length) of the Arpeggio for the entire Performance. This is the offset value
for the Gate Time Rate of the Arpeggio for each Part.
Settings:
-100% – +100%
Common Arp Velocity (Common Arpeggio Velocity Rate)
Determines the Velocity Rate of the Arpeggio for the entire Performance. This is the offset value for the
Velocity Rate of the Arpeggio for each Part.
Settings:
-100% – +100%
Common Motion Seq Amplitude (Common Motion Sequencer Amplitude)
Determines the Amplitude of the Motion Sequencer for the entire Performance. "Amplitude" determines
how the entire Motion Sequence changes.
This is the offset value for the Part Motion Seq Amplitude, which is also the offset value for the Lane
Amplitude. This results in that both of the Common and Part MS Amplitudes offset the Amplitude setting in
the Lane (only when "MS FX" is set to on for the Lane).
Settings:
-64 – +63
Common Motion Seq Shape (Common Motion Sequencer Pulse Shape)
Determines the Pulse Shape of the Motion Sequencer for the entire Performance. This changes the step
curve shape of the sequence.
This is the offset value for the Part Motion Seq Pulse Shape, which is also the offset value for the Lane
Pulse Shape. This results in that both of the Common and Part MS Pulse Shapes offset the Pulse Shape
setting for the parameter in the Lane (only when "MS FX" is set to on for the Lane and "Control" is set to on
for the parameter).
Settings: -100 – +100
Common Motion Seq Smooth (Common Motion Sequencer Smoothness)
Determines the Smoothness of the Motion Sequencer for the entire Performance. "Smoothness" is the
degree to which the time of the Motion Sequence is smoothly changed.
This is the offset value for the Part Motion Seq Smoothness, which is also the offset value for the Lane
Smoothness. This results in that both of the Common and Part MS Smoothnesses offset the Smoothness
setting for the parameter in the Lane (only when "MS FX" is set to on for the Lane).
Settings: -64 – +63
Common Motion Seq Random (Common Motion Sequencer Random)
Determines the Random of the Motion Sequencer for the entire Performance. "Random" is the degree to
which the Step Value of the Sequence is randomly changed.
This is the offset value for the Part Motion Seq Random when "MS FX" is set to on for the Lane.
Settings:
-64 – +63
Part Clock Swing (Clock Swing)
Determines the Swing of the Arpeggio/Motion Sequencer for the selected Part. This parameter delays
notes on even-numbered beats (backbeats) to produce a swing feel.
• +1 and higher: Delay the Arpeggio notes.
• -1 and lower: Advance the Arpeggio notes.
• 0: Exact timing as set by "Arpeggio/Motion Sequencer Grid" Value, resulting in no swing.
Judicious use of this setting lets you create swing rhythms and triplet feels, such as shuffle and bounce.
Settings: -120 – +120
Part Clock Unit (Part Unit Multiply)
This adjusts the Arpeggio/Motion Sequencer playback time for the selected Part.
Settings:
50% – 400%, Common
200%: The playback time will be doubled and the tempo is halved.
100%: The normal playback time.
50%:
The playback time will be halved and the tempo doubled.
Common: The value set in the Unit Multiply common to the all Parts will be applied.
Part Arp Gate Time (Part Arpeggio Gate Time)
Determines how much the Gate Time (length) of the Arpeggio notes is offset from the original value. This is
the offset value for the Gate Time Rate
Settings: 0% – 200%
MONTAGE Reference Manual
Edit
Normal Part (AWM2) Drum Part
(page 76) of each Arpeggio Select setting.
Search Utility
Normal Part (FM-X)
Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
79