Yamaha Montage 7 Reference Manual page 123

Reference
Performance
RevSend (Reverb Send)
VarSend (Variation Send)
Determines the Send level of the signal sent from Insertion Effect A/B (or the bypassed signal) to the
Reverb/Variation effect. This is active only when the Part Output/Drum Key Output is set to "MainL&R."
Settings:
0 – 127
Part Output (Part Output Select)
Determines the specific output for the audio signal.
Settings: MainL&R, AsgnL&R, USB1&2...USB29&30, AsgnL, AsgnR, USB1 – 30, Off, Drum
MainL&R:
Outputs in stereo (two channels) to the OUTPUT [L/MONO]/[R] jacks.
AsgnL&R:
Outputs in stereo (two channels) to the ASSIGNABLE OUTPUT [L]/[R] jacks.
USB1&2 ... USB29&30:
AsgnL:
Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [L] jack.
AsgnR:
Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [R] jack.
USB1 – 30: Outputs in mono (Channels 1 – 30) to the [USB TO HOST] terminal.
Off:
No audio signal for the Part is output.
Drum: "Drum Key Out" is displayed to determine the specific output for each Drum Key.
Envelope Follower
Calls up the Envelope Follower Setting display.
Refer to the Routing display
InsRev (Insertion Reverb Send)
InsVar (Insertion Variation Send)
Determines the Send level for the entire Drum Part (all keys), sent from Insertion Effect A/B to the Reverb/
Variation effect.
This is active only when the Drum Key Connection Switch is set to "InsA" or "InsB" and the Part Output/
Drum Key Output is set to "MainL&R."
Settings: 0 – 127
MONTAGE Reference Manual
Edit
Normal Part (AWM2)
Outputs in stereo (Channels 1&2 – 29&30) to the [USB TO HOST] terminal.
(page 68) for Normal Parts (AWM2).
Search
Drum Part Normal Part (FM-X)
Utility Live Set
Common/Audio
Drum Part Edit
Common
Part Settings
General
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Control Assign
Receive SW
Key
Osc / Tune
Filter
Level / Pan
Element EQ
123