Pitch/Filter; Peg/Scale (Pitch Eg/Scale); Peg Depth - Yamaha Montage 7 Reference Manual

Reference
Performance

Pitch/Filter

Pitch
Same as the Element Common Edit parameters for Normal Parts (AWM2)
Legato Slope parameter is not available.

PEG/Scale (Pitch EG/Scale)

From the Pitch EG/Scale display you can make all time and level settings for the Pitch EG, which determine
how the pitch of the sound changes over time, and the Scale for Parts.
[PERFORMANCE]  [EDIT]  Part selection  ELEMENT/OPERATOR [COMMON] 
Operation
[Pitch/Filter]  [PEG/Scale]
The full names of the available parameters are shown in the chart below, as they appear in the display.
Initial
Time –
Level Hold Level
Settings:
Time: 0 – 99
Level: -50 – +50

PEG Depth

Determines the pitch range for Pitch EG.
Settings:
8 oct, 2 oct, 1 oct, 0.5 oct
Depth/Vel (PEG Depth Velocity Sensitivity)
Determines how the pitch range will be generated according to the Velocity (strength) with which you play
notes on the keyboard.
Settings: 0 – 7
Time/Key (PEG Time Key Follow Sensitivity)
Determines the degree to which the notes (specifically, their position or octave range) affect the Pitch EG
Times. The Center Key (C3) is used as the basic pitch for this parameter.
Settings: 0 – 7
Positive values:
0:
The PEG transition speed does not change, regardless of the played note.
MONTAGE Reference Manual
Edit
Normal Part (AWM2)
Attack Decay1
Attack Time Decay1 Time
Attack Level Decay1 Level
High notes result in a high PEG transition speed while low notes result in a slow speed.
Search
Drum Part Normal Part (FM-X)
(page 60), except that the
Decay2 Release
Decay2 Time Release Time
Decay2 Level Release Level
Utility Live Set
Common/Audio
Normal Part (FM-X) Edit
Common
Part Settings
General
Algorithm
Zone Settings
Zone Transmit
Pitch / Filter
Pitch
PEG/Scale
Filter Type
Filter EG
Filter Scale
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
2nd LFO
Control Assign
Receive SW
Operator
Form / Freq
Level
134