Other Connectors; Atx Power Supply Connector (Cn5 And Jp7) - Shuttle FS51 Instruction Manual

Hide thumbs Also See for FS51:

Table of Contents

!" Other Connectors

ATX Power Supply Connectors (CN5 and JP7)

This motherboard uses 20-pin (CN5) Pentium 4 standard ATX power

header, and JP7 with 1X4-pin +12V PC ATX power supply headers.

Please make sure you plug in the right direction.

P3/P4 ATX Power supply headers

Note

Note 1:

Note 2:

Note 3:

Note 4:

CN5

JP7

This motherboard can't support AC power resumes from

power failure, you must press power button to power-on.

The ATX power connector is directional and will not go in unless the

guides match perfectly making sure that pin#1 is properly positioned.

Make sure the latch of the ATX power connector clicks into place to

ensure a solid attachment.

Your ATX power supply must be supplied to ACPI +5V standby power

and at least 720mA compatible.

Make sure your power supply have enough power for higher speed

processor installed.

- 36 -

JP7

C N 5

ATXPWR

Table of Contents