Internal Peripherals Connectors; Enhanced Ide And Floppy Connector - Shuttle FS51 Instruction Manual

! ! ! ! ! Internal Peripherals Connectors

Enhanced IDE and Floppy Connectors
D1
D2
The mainboard features two 40-pin dual-channel IDE device connectors
D3
(IDE1/IDE2) providing support for up to four IDE devices, such as CD-ROM
and Hard Disk Drives (H.D.D.).
This mainboard also includes one 34-pin floppy disk controller (FDC) to
accommodate the Floppy Disk Drive (FDD). Moreover, this mainboard
comes with one 80-pin ATA 133/100 ribbon cable to connect to IDE H.D.D.
and one 34-pin ribbon cable for F.D.D. connection.
Important:Ribbon cables are directional, therefore, make sure to always
connect with the red cable stripe on the same side as pin #1 of
the IDE1/IDE2 or FDC connector on the mainboard.
- 35 -
1
IDE 2
IDE 1
1
1 FDD