Table of Contents
Advertisement
Onboard Serial Port1/Port2
Select an address and corresponding interrupt for the first and second
serial ports.
! The choice: 3E8/IRQ4, 2E8/IRQ3, 3F8/IRQ4, 2F8/IRQ3,Auto, or
Disabled.
Onboard Parallel Port
! The Choice: Enabled or Disabled.
Parallel Port Mode
! The Choice: SPP, EPP, ECP or ECP + EPP mode.
ECP Mod Use DMA
! The Choice: 1 or 3.
IDE HDD Block Mode
The chipset contains a PCI IDE interface with support for two IED
channels. Select Enabled to activate the primary and/or secondary
IDE interface. Select Disabled to deactivate this interface, if you
install a primary and/or secondary add-in IDE interface IDE interface.
! The choice: Enabled or Disabled.
Onboard LAN Boot ROM
This item is used to determine initial device when system power on.
! The choice: Enabled or Disabled.
Init Display First
This item is used to determine initial device when system power on.
! The choice: AGP or PCI Slot.
AGP Auto Calibration
This item enable/disable the AGP driving functions.
! The choice: Enabled or Disabled.
OnChip VGA
This item allows you to control the onboard VGA.
! The Choice: Enabled or Disabled.
System Share Memory Size
This Item can be selected by BIOS.
! The choice: 4MB, 8MB, 16MB, 32MB, or 64MB.
- 63 -
Advertisement
Table of Contents
