Table of Contents
Advertisement
! The choice: Enabled, Disabled.
IRQ 8 Break Suspend
This field allows you to enable or disable monitoring of IRQ8 so that it
does not awaken the system from a suspend mode.
! The choice: Enabled, Disabled.
RING Power Up Control
When set to Enabled, the system power will be turned on if there is any
modem activity.
! The choice: Enabled, Disabled.
PCIPME Power Up Control
When set to Enabled, system power will be turned on if there is any
PCI card activity from PCI cards that trigger a PME event, such as
LAN or Modem cards.
! The choice: Enabled, Disabled.
USB Port Wake Up Control
This item enable/disable the USB wakeup function.
! The choice: Enabled, Disabled.
Power Up by Alarm
When set to Enabled, the following three fields become available and
you can set the month, date (day of the month), hour, minute and
second to turn on your system.
! The choice: Enabled, Disabled.
Month Alarm
This is for specifying the alarm month which system will awaken
the system from suspend mode.
! The choice: NA, 1 ~ 12.
Day of Month Alarm
This item selects the alarm date.
! Key in a DEC number: Min=0, Max=31.
Time (hh : mm : ss) Alarm
This item selects the alarm Time.
[hh]
! Key in a DEC number: Min=0, Max=23.
[mm/ss]
! Key in a DEC number: Min=0, Max=59.
- 67 -
Advertisement
Table of Contents
