Parallel Port Header (Jp11); Front-Panel Microphone And Line_Out Header (Jp4) - Shuttle FS51 Instruction Manual

Parallel Port Header (JP11)

+ %
One DB25 male parallel port header is located at the rear panel of the
maiboard. The header is used to connect the cable attached to parallel
connector. But the parallel cable and connector os optional at the time of
purchase.

Front-Panel Microphone and Line_out Header (JP4)

+ &
This header allows users to install auxiliary front-oriented microphone and line-
out ports for easier access. Either the Mic and Line_out connector on back-
panel or JP4 header are available at the same time. If you would like to use
this JP4 header on front-panel, please remove all jumpers from JP4 and in-
stall your special Extra Mic / Line_out cable instead.
2 4 6 8 10
1 3 5 7 9
Pins Assignment:
1=AUD_MIC
3=AUD_MIC_BIOS
5=AUD_FRONT_R
7=HP_ON
9=AUD_FRONT_L
2=AUD_GND
4=AUD_VCC
6=AUD_RET_R
8=KEY
10=AUD_RET_L
- 34 -
JP4
Front Audio
1