Toyota SIENNA 2011 Quick Reference Manual page 80

1-2. Operating the AUTO ACCESS SEAT
STEP 6
When the AUTO ACCESS SEAT stops automatically,
release the switch.
When returning the AUTO ACCESS SEAT to the vehicle, release
the switch after the seat has stopped automatically and the beep
has sounded once.
Seat raise/lower switch
n
When the seat raise/lower switch is pressed, the beep will sound once and
the AUTO ACCESS SEAT will begin to operate. The seat will not operate if
the switch is pressed repeatedly.
NOTICE
To prevent AUTO ACCESS SEAT damage
n
l Press and hold the seat raise/lower switch, instead of pressing them
repeatedly.
l Open the right-hand sliding door fully before returning the AUTO ACCESS
SEAT inside the vehicle. The footrest may hit the vehicle body, possibly
causing damage.
36
SIENNA AAS_U (OM45460U)
I n f o r ma t i o n P r o v i d e d b y :