Toyota SIENNA 2011 Quick Reference Manual page 393

3-1. When you think a malfunction has occurred
AUTO ACCESS SEAT
If you suspect that the AUTO ACCESS SEAT is malfunctioning, try
the correction procedures listed in the table below.
If the seat still does not operate even after trying the procedures, it is
likely that the seat is malfunctioning. Do not use the AUTO ACCESS
SEAT, and have the seat inspected by your Toyota dealer immedi-
ately.
If the AUTO ACCESS SEAT does not move after being
n
moved outside the vehicle
→P. 47
If you think the wireless remote control is malfunctioning
n
→P. 59
If the AUTO ACCESS SEAT does not move
Reason
The seat belt of the AUTO
ACCESS SEAT is buckled.
The right-hand sliding door is
not opened fully.
The shift lever is in a position
other than P.
44
SIENNA AAS_U (OM45460U)
Correction procedure
Unbuckle the seat belt and try operating
the AUTO ACCESS SEAT again.
Open the right-hand sliding door fully.
Shift the shift lever to P.
I n f o r ma t i o n P r o v i d e d b y :