Toyota SIENNA 2011 Quick Reference Manual page 397

3-1. When you think a malfunction has occurred
STEP 4
STEP 5
Within 10 seconds after the beep from
(until the next beep starts to sound), press the seat position
adjustment switch (
then press the raise or lower side of the seat raise/lower
switch (
The beep sounds twice when initialization of the seat position infor-
mation has been completed. Conduct the procedures explained in
the following "If the AUTO ACCESS SEAT moves when a switch is
pressed" section.
48
SIENNA AAS_U (OM45460U)
Press and hold the seat position
adjustment switch on the right-
hand side of the seat in either
the front or back direction and, at
the same time as press and hold
the seat raise/lower switch in
either the raise or lower direction
for approximately 10 seconds,
until the beep sounds.
) either forward or back 4 times, and
) 4 times.
I n f o r ma t i o n P r o v i d e d b y :
Seat position adjustment
switch
Seat raise/lower switch
STEP 4
has sounded