Toyota SIENNA 2011 Quick Reference Manual page 641

■
Deviation calibration
Stop the vehicle where it is safe to drive in a circle.
STEP 1
STEP 2
Referring to the map above, press the switch to select the
STEP 3
number of the zone you are in.
If the direction is displayed several seconds after adjustment, the
calibration is complete.
■
Circling calibration
Press and hold the switch.
A number (1 to 15) appears on
the compass display.
When "C" appears on the dis-
play, drive the vehicle at 5 mph
(8 km/h) or less in a circle until a
direction is displayed.
If there is not enough space to
drive in a circle, drive around the
block until the direction is dis-
played.
I n f o r ma t i o n P r o v i d e d b y :
3-8. Other interior features
3
575