Toyota SIENNA 2011 Quick Reference Manual page 398

If the AUTO ACCESS SEAT moves when a switch is pressed
l Initialize the seat position information before conducting the opera-
tions listed here.
l The movements of the seat while conducting these operations will
be different from normal.
l If the seat resets while the operations from
being carried out, a long beep will sound, and the seat's move-
ments will return to normal.
STEP 1
Adjust the head restraint to the downmost position. (→P. 9)
STEP 2
Fold the footrest up. (→P. 13)
STEP 3
Fold the front passenger seatback while pulling the seatback
angle lever. (→P. 20)
STEP 4
SIENNA AAS_U (OM45460U)
3-1. When you think a malfunction has occurred
Press and hold the raise side of
the seat raise/lower switch while
the
raises, a short beep sounds, the
seat slides further into the vehi-
cle and a short beep sounds
again.
I n f o r ma t i o n P r o v i d e d b y :
STEP 4 STEP
to
AUTO ACCESS
9
are
3
SEAT
49