Toyota SIENNA 2011 Quick Reference Manual page 400

STEP 7
STEP 8
SIENNA AAS_U (OM45460U)
3-1. When you think a malfunction has occurred
Press the rear side of the seat
position adjustment switch on
the right-hand side of the seat,
and slide the AUTO ACCESS
SEAT toward the rear of the
vehicle until the beep sounds.
If the rear side of the seat position
adjustment switch is pressed and
held while the lower side of the
seat raise/lower switch is being
pressed, the AUTO ACCESS
SEAT will slide towards the front
of the vehicle.
Press and hold the rear side of
the seatback angle adjustment
switch on the right-hand side of
the seat until the seatback auto-
matically stops moving.
If the seatback does not move,
proceed to
I n f o r ma t i o n P r o v i d e d b y :
STEP 9
.
51
3