Toyota SIENNA 2011 Quick Reference Manual page 332

Selecting conventional constant speed control mode
Dynamic radar cruise control can be used as conventional cruise
control if you select constant speed control mode.
Press the "ON-OFF" button to
activate the cruise control.
Press the button again to deacti-
vate the cruise control.
Vehicles without a smart key sys-
tem:
Vehicle-to-vehicle distance con-
trol mode is always reset when
the engine switch is turned to the
"ON" position.
Vehicles with a smart key system:
Vehicle-to-vehicle distance con-
trol mode is always reset when
the
switch is turned to IGNITION ON
mode.
Switch to constant speed con-
trol mode.
(Push the lever forward and
hold for approximately one
second.)
Cruise control indicator will come
on.
Adjusting the speed setting:
→P. 277
Canceling
speed setting: →P. 279
I n f o r ma t i o n P r o v i d e d b y :
2-4. Using other driving systems
"ENGINE START
and resuming
2
STOP"
the
281