Toyota SIENNA 2011 Quick Reference Manual page 636

3-8. Other interior features
Test the operation of the HomeLink
STEP 5
programmed button. Check to see if the gate/device operates
correctly.
Repeat the steps above to program another device for each of
STEP 6
the remaining HomeLink
■
Programming other devices
To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.
■
Reprogramming a button
The individual HomeLink
reprogrammed. To reprogram a button, follow the programming
instructions.
Operating the HomeLink
Press the appropriate HomeLink
light on the HomeLink
The HomeLink
as the button is pressed.
Reprogramming a HomeLink
Press and hold the desired HomeLink
®
HomeLink indicator light will start flashing slowly. Keep pressing the
®
HomeLink button and press and hold the transmitter button until the
®
HomeLink indicator light changes from a slow to a rapid flash.
Release the buttons.
570
®
®
buttons cannot be erased but can be
®
®
transceiver should turn on.
®
continues to send a signal for up to 20 seconds as long
®
I n f o r ma t i o n P r o v i d e d b y :
®
by pressing the newly
buttons.
®
button. The HomeLink
button
®
button. After 20 seconds, the
®
indicator