Toyota SIENNA 2011 Quick Reference Manual page 672

4-3. Do-it-yourself maintenance
■
After changing the engine oil (U.S.A. only)
The engine oil maintenance data should be reset. Perform the following pro-
cedures:
Vehicles without a smart key system
STEP 1
Switch the display to the trip meter A (→P. 229) and then turn the
engine switch off.
Vehicles with a smart key system
Switch the display to the trip meter A (→P. 229) and then turn the
"ENGINE START STOP" switch off.
STEP 2 Vehicles without a smart key system
While pressing the trip meter reset button (→P. 229), turn the
engine switch to the "ON" position.
Vehicles with a smart key system
While pressing the trip meter reset button (→P. 229), turn the
"ENGINE START STOP" switch to IGNITION ON mode.
STEP 3 Vehicles without a multi-information display
Continue to press and hold the button until the trip meter A displays
"000000".
Vehicles with a multi-information display
Continue to press and hold the button until "COMPLETE" appears
on the multi-information display.
614
I n f o r ma t i o n P r o v i d e d b y :