Toyota SIENNA 2011 Quick Reference Manual page 402

If the AUTO ACCESS SEAT does not move even when a switch is
pressed
Before conducting this procedure, conduct the procedures explained
in the "Initializing the seat position information" and "If the AUTO
ACCESS SEAT moves when a switch is pressed" sections.
If the AUTO ACCESS SEAT still does not return to the vehicle, the
following procedure can be used to return the AUTO ACCESS SEAT
to the vehicle.
STEP 1
Adjust the head restraint to the downmost position. (→P. 9)
STEP 2
Fold the footrest up. (→P. 13)
STEP 3
Fold the front passenger seatback while pulling the seatback
angle lever. (→P. 20)
STEP 4
STEP 5
SIENNA AAS_U (OM45460U)
3-1. When you think a malfunction has occurred
Remove the 4 clips and remove
the unit cover. (→P. 57)
Remove the clips from the unit,
Clips
and roll back the cover. (→P. 57)
I n f o r ma t i o n P r o v i d e d b y :
3
53