US Water Systems Greenwave Plus 385-GWP-1000-UV Owner's Manual page 9

9
USWATER 5.0 & USWATER 6.0 Power-up Sequence
Upon start up, the 5.0 & 6.0 controller will run through a diagnostic start-up and the sequence will
be displayed as follows on the color LCD:
Next, the controller checks for the installation of any optional modules that may be installed on the
system. It first checks to see if a module is installed and then either initializes the module to
function with the controller or returns a "not detected" screen and moves on to the next module.
The screens will appear as follows:
UV Sensor
Module Check
Solenoid
Module Check
4-20 mA
Module Check
Visit us online at www.USWaterSystems.com
UV Light Equipment Specifications
US Water GreenWave Plus Salt-Free Water Conditioner | 385-GWP
Give us a call at: 1-800-608-8792