US Water Systems Greenwave Plus 385-GWP-1000-UV Owner's Manual page 11

11
USWATER 6.0 Operational Screens
On systems that have the UV module installed (and on all USWATER6.0 systems), the default screen
shows the % UV Intensity. At any point during operation the user is able to scroll through the % UV
Intensity, Lamp life remaining an d QR Code s c r een s b y s i m p l y p r es s i n g t h e b u t t o n l o c at ed
on the
front of the controller.
USWATER 6.0 % UV Intensity
If your system is equipped with a UV sensor the % UV Output screens will indicate the level of UV intensi-
ty that is being detected within the reactor by the sensor. This will always be visible on the Home Screen
of the controller. Things that can affect the % UV Output are poor water quality, scaling of the quartz
sleeve and/or sensor, lamp failure, expired lamp life and sensor failure. The following screens show the
% UV Output dropping on a monitored system.
Visit us online at www.USWaterSystems.com
UV Light Equipment Specifications
US Water GreenWave Plus Salt-Free Water Conditioner | 385-
Give us a call at: 1-800-608-8792