US Water Systems Greenwave Plus 385-GWP-1000-UV Owner's Manual page 18

18
3. Now mount the filter housing to the wall using the appropriate fasteners for your wall materi-
al. It is preferred that this is mounted on a secured board or wall stud as it will be heavy
when full of water.
4. The water source of the application should be plumbed to the "IN" port on the filter housing.
The outlet plumbing from the sediment filter housing will be connected to the GreenWave
Carbon Tank to the "DOWNFLOW" inlet.
Visit us online at www.USWaterSystems.com
US Water GreenWave Plus Salt-Free Water Conditioner | 385-
Filter Housing Installation
Give us a call at: 1-800-608-8792