Installation, Operation and Maintenance Manual GreenWave Residential Systems Chemical Free, Salt Free Scale Prevention GreenWave -1000 GreenWave –1500 GreenWave –2000 US Water Systems, Inc. 1209 Country Club Road Indianapolis, IN 46234 1-800-608-8792 support@uswatersystems.com www.uswatersystems.com...
Installation, Operation and Maintenance Manual GreenWave System Table of Contents Introduction ......................3 System Overview ....................4 System Specifications ..................5 Cautions ......................6 Notes to the Installer ................... 6 Installation and Start-Up ..................7 Note to the Homeowner ..................8 Warranty ......................
Installation, Operation and Maintenance Manual GreenWave System Introduction The GreenWave system provides protection from scale formation throughout the home. The GreenWave system can be installed at the point of entry to treat your entire home, both hot and cold water, or it can be located directly before a water heater or other device (e.g.
Installation, Operation and Maintenance Manual GreenWave System System Overview Pre-Filter Tank Head Media Tank Typical Connection Fittings Bypass 3/4” or 1” PVC Assembly Glue Connectors...
Installation, Operation and Maintenance Manual GreenWave System Equipment Specifications GreenWave systems are complete, self-contained, loaded with media and ready to use. A simple inlet and outlet connection is all that is required for installation. Please review operating pressures, temperatures and water chemistry limitations to ensure compatibility. Specifications Inlet/Outlet Connection 3/4”...
Installation, Operation and Maintenance Manual GreenWave System An important note about iron, manganese and copper in the water supply Iron and Manganese Just as with conventional water softening media, GreenWave needs to be protected from excess levels of certain metals that can easily coat the active surface, reducing its effectiveness over time. Public water supplies rarely, if ever, present a problem, but if the water supply is from a private well confirm that the levels of iron (Fe) and manganese (Mn) are less than 0.3 mg/L and 0.05 mg/L respectively.
Installation, Operation and Maintenance Manual GreenWave System Installation 1. Place the GreenWave tank in the desired location. 2. Attach the mounting bracket to the pre-filter using the included screws and tighten. 3. Securely mount the pre-filter on the wall making sure to properly anchor the filter.
Installation, Operation and Maintenance Manual GreenWave System A note to the homeowner Your GreenWave system will improve the properties of water throughout your home. Here are some things to expect and some recommendations for maximizing the benefits and your enjoyment of your GreenWave system.
7. Defective parts are subject to inspection by either US Water Systems, Inc. or any authorized representative before final commitment of warranty adjustment is made. 8. US Water Systems, Inc. reserves the right to make changes or substitutions in parts or equipment with material of equal quality or value and of then current production.
Page 10
Installation, Operation and Maintenance Manual GreenWave System...
Page 11
We warrant that for life from the date of purchase, regulations or other circumstances beyond the we will replace the head assembly at no charge to control of US WATER SYSTEMS, INC.. you except for transportation and standard labor charges.
Need help?
Do you have a question about the GreenWave 1000 and is the answer not in the manual?
Questions and answers