Download Print this page

Connecting A Guest Laptop - Smarttech Smart Board 800 series User Manual

Hide thumbs Also See for Smart Board 800 series:

Table of Contents

CHAPTER 3

SETTING UP THE INTERACTIVE WHITEBOARD

Connecting a guest laptop

If you want to connect a guest laptop without installing SMART Product Drivers on it, disconnect

the USB cable from the resident computer, and then connect it to the laptop. You'll immediately

have touch control of the interactive whiteboard, but won't be able to use digital ink. You'll also

need to connect a video cable between the laptop and projector.

NOTE

With a laptop connected, the Ready light on your interactive whiteboard flashes until you install

SMART Product Drivers. This is normal. See Power module buttons and indicators on page 22

for more information about Ready light states.

You must also install SMART Product Drivers (refer to page 14) on your laptop if you want to use all

the features of the interactive whiteboard.

smarttech.com/kb/144817

Table of Contents

Table of Contents

Do you have a question about the Smart Board 800 series and is the answer not in the manual?