Chapter 2: Installing And Securing The Smart Board Interactive Whiteboard; Environmental Requirements - Smarttech Smart Board 800 series User Manual

Chapter 2
Installing and securing the
SMART Board interactive
whiteboard
Environmental requirements
Installing the SMART Board interactive whiteboard
Installation tips
Replacing an existing interactive whiteboard on drywall
Securing the pen tray to the interactive whiteboard
Securing the pen tray to the brackets

Environmental requirements

Before installing the interactive whiteboard, review the following environmental requirements.
Environmental
requirement
Operating
temperature
Storage temperature
Humidity
Water and fluid
resistance
7 smarttech.com/kb/144817
Parameter
41°F to 95°F (5°C to 35°C)
-40°F to 120°F (-40°C to 50°C)
5% to 80% relative humidity, non-condensing
Intended for indoor use only. Doesn't meet any salt-spray or water
l
ingress requirements.
Don't pour or spray liquids directly onto the interactive whiteboard
l
or any of its sub-components. These liquids might get into areas
where they could damage sensitive electronic components. Refer
to Keeping the writing surface clean on page 37 for detailed
instructions on cleaning the interactive whiteboard.
7
8
9
9
10
11