Activating/Deactivating The Display Of Voip Status Messages - Siemens Gigaset S675 IP Manual

Subnet Mask:
For
IP Address Type
The subnet mask that is currently assigned to the base station is displayed.
It cannot be amended.
For IP Address Type
Enter the subnet mask to be assigned to the base station (overwriting the
current settings).
The default setting is 255.255.255.0
For information on the IP address, please see
Page
DNS Server:
For IP Address Type
Enter the IP address for the preferred DNS server. The DNS server (Domain
Name System) converts the symbolic name of a server (DNS name) to the
public IP address for the server when the connection is made.
You can specify your router's IP address here. The router forwards phone
address requests to its DNS server.
192.168.2.1 is the default.
Default Gateway:
For
IP Address Type
Enter the IP address for the default gateway, by means of which the local
network is connected to the Internet. This is generally the local (private) IP
address for your router (e.g. 192.168.2.1). Your phone requires this infor-
mation to be able to access the Internet.
192.168.2.1 is the default.
¤
Press

Activating/deactivating the display of VoIP status messages

If the function is activated, a VoIP status code for your service provider is dis-
played.
Activate the function if, for example, you have problems with VoIP connections.
You will receive a provider-specific status code, which supports the service
when the problem is analyzed. You will find a table with the possible status
screens in the appendix (
¢
v Ð
~
Show Stat. on HS
ú For information on how to make the setting on the Web configurator,
£
Page
= Dynamic:
= Static:
236.
= Static:
= Static:
to save the settings.
§Save§
£
Page
¢ ¢
Telephony VoIP
Enter the system PIN and press
Select and press
190.
195).
.
§OK§
‰
( = on).
§OK§
Making VoIP settings
Page 236 and the glossary on
141