Logging In, Setting The Web Configurator Language; Logging Off - Siemens Gigaset S675 IP Manual

Logging in, setting the Web configurator language

Once you have successfully established the connection, the
displayed in the Web browser.
You can select the language you want the menus and Web configurator dialogs
to be displayed in. The language that is currently selected is displayed in the top
field of the Web page.
¤
If necessary, click
¤
Select the language.
¤
Enter your phone's system PIN (default setting: 0000) in the bottom field of
the Web page, to access the Web configurator functions.
¤
Select OK.
Once you have successfully logged in, a
mation on the Web configurator.
If you enter an incorrect system PIN, a corresponding message is displayed. You
are prompted to re-enter the PIN.
If you enter an incorrect system PIN a second time, the PIN field is blocked for
a short time (grayed out). The duration of the block will double each time a PIN
is subsequently entered incorrectly.
Please note
u
If you have forgotten your system PIN, you must restore your device's fac-
tory settings. Please note that this will restore all other settings too
£
( Page
u
After approximately 10 minutes of inactivity, you are automatically logged
off. The next time you try to make an entry or open a Web page, the
Web page is displayed. Enter the system PIN again to log back in.
u
Any entries that you did not save on the phone before automatic log-off are
lost.

Logging off

In the menu bar (
configurator, you will see the
the Web configurator.
Warning
Always use the
tor. If, for example, you close the Web browser without logging off before-
hand, it is possible that access to the Web configurator is blocked for a few
minutes.
to open the list of available languages.
135).
£
Page 148) at the top right of every Web page in the Web
Log Off
command to end the connection to the Web configura-
Log Off
Setting the phone with the PC
Home screen opens with general infor-
command. Select Log Off
Web page is
Login
Login
to log off from
147