Siemens Gigaset S675 IP Manual page 160

Setting the phone with the PC
¤
Select the
The telephone establishes a connection to the Internet and downloads all
data required for the VoIP connection, i.e. the general provider information
and your personal provider data (account data) are saved to your base sta-
tion.
If you have already entered details on the Web page, this is deleted as soon
as
Start Auto Configuration
and
General Provider Data
are overwritten by the downloaded data.
Generally, you should not have to enter any additional data on this Web
page.
Please note
If the message
data is loaded onto the phone. Possible causes of this are:
u
The incorrect code has been entered (e.g. upper/lower case rules have
not been followed). If necessary, enter the code again.
u
The file that has been downloaded is invalid. Please consult your VoIP
provider.
When the download is complete, the
¤
Activate the connection as described on
You can then be reached on the corresponding VoIP phone number.
u
Automatic configuration of general VoIP provider data
Prerequisite: You have received your account details from your VoIP pro-
vider (e.g.
Profile files for the most important VoIP providers are available to download
from the Internet via the Gigaset configuration server. The address for the
server is stored in your phone (
To load the data onto your telephone, proceed as follows:
¤
Select
information on the download procedure.
Please note
If you select the
made to the Web page are saved and checked. Values may need to be cor-
rected before the
The download procedure consists of several steps:
¤
Select the
¤
From the list, select the country for which the list of VoIP providers is to
be loaded.
¤
Select the
¤
Select your VoIP provider from the list.
If your provider is not included in the list, select
you will have to enter the general provider data by hand (see
eral Provider
158
Start Auto Configuration
is selected. The fields in the
areas and the server addresses in the
Download of settings not possible! File is corrupt!
Authentication Name,
in the
Select VoIP Provider
Select VoIP Provider
Select VoIP Provider
Next button.
button.
Next
Data" and "Area:
button.
list is displayed.
Connections
Page 163.
Authentication password).
£
Page 187).
Auto Configuration
button, any changes that have been
operation is started.
Other
Network" below).
Personal Provider Data
area
Network
appears, no
area. This will display
Provider. In this case
"Area: Gen-