Siemens Gigaset S675 IP Manual page 168

Setting the phone with the PC
Please note
If only one VoIP connection is permitted, the following VoIP network services
will no longer be available:
u
Call waiting is not displayed during a call via VoIP.
u
External consultation call from a VoIP call
u
Call swap and initiating a conference call via VoIP
Voice Quality
Default settings for the codecs used are stored in your phone: one setting opti-
mized for narrow and one for wide bandwidths.
¤
Activate one of the options
bandwidth
settings are shown in the
changed.
¤
Activate the
tion-specific voice codecs yourself (see
Area: Settings for Connections
In this area you can make specific settings for each of your VoIP phone num-
bers.
You can make the following settings for each VoIP phone number configured
on your phone:
Volume for VoIP Calls
Depending on the VoIP provider, it is possible that the received handset/ear-
piece volume is too low or too high, so that adjusting the volume via the hand-
set is not adequate.
Specify whether the received volume range is too high or too low. The follow-
ing options are available:
Low
Handset/earpiece volume is too high. Activate this option to reduce the vol-
ume by 6 dB.
Normal
The handset/earpiece volume does not need to be raised/lowered.
High
Handset/earpiece volume is too low. Activate this option to increase the vol-
ume by 6 dB.
166
Optimized for low bandwidth
if you wish to accept a default setting for all VoIP connections. The
Settings for Connections
Own Codec preference
area and cannot be
option if you wish to select and set connec-
"Area: Settings for
/ Optimized for high
Connections").