Siemens Gigaset S675 IP Manual page 32

First steps
Completing the VoIP settings
After the entries have been completed, the handset reverts to idle status.
Ð
01/ 15 /2009 19:45
Phone
¤
Test whether your VoIP data is complete and has been stored in the phone
correctly.
Calling via VoIP:
Enter a number using the handset keypad and press and hold the Talk key
c.
If a VoIP connection cannot be established, a corresponding message is shown
in the display.
You can now use your phone to make calls via the fixed line network and the
Internet! Callers can reach you on your fixed line number and your VoIP number.
Please note
u
To ensure that you can always be reached via the Internet, the router must
be permanently connected to the Internet.
u
If you have started the connection assistant via the menu, once the entries
are completed, press and hold the End Call key
idle status.
u
If you try to make a call via a VoIP connection that is not configured cor-
rectly, the following VoIP status message will appear in the display:
figuration error: xxx
their respective meanings are listed on
Please note
You can enter five additional VoIP accounts (VoIP phone numbers) via the Web
configurator later
your phone can then be reached via up to seven different phone numbers. You
can assign the phone numbers to the individual handsets that are registered
with the base station as send and receive numbers
30
à V
INT 1
IP
(xxx = VoIP status code). The various status codes and
£
Page 155). Including your fixed line network number,
(
a
to return the handset to
Page 195.
£
Page 169).
(
IP con-