Siemens Gigaset S675 IP Manual page 66

Making calls via network services
Consultation calls
During a call:
¢
§Options§
~ c
The number must be dialed via VoIP.
Please note
After a few seconds, the number selected for a consultation call is saved in the
Last Number Redial list.
If the participant ends the consultation call, press
If the participant does not answer, press
If the participant answers, you have the following options:
u
Call swap:
¤
Use q to swap between the participants.
¤
End call with active participant:
u
Conference call:
¤
Talk to both participants:
¤
End conference call (call swap):
¤
End call with both participants: press the End Call key a.
u
Transfer (provider-dependent):
Prerequisite:
– You are call swapping and you phoned the currently active participant
yourself.
– You are connected to an external participant whom you have called your-
self and start an external consultation call.
¤
To connect the two external participants:
§Options§
If the call transfer was successful, a message will appear to this effect. The
handset will then switch to idle.
If the call transfer was not successful, the party that was previously waiting
will call you back automatically.
You can also end the call before the second participant answers.
Please note
You can configure your telephone so that you can also connect the partici-
pants together by pressing the S key or the End Call key a
£
( Page
64
External Call
Enter number or copy it from the directory and briefly press/press
and hold the Talk key c.
Call Transfer
177).
§End§
"
to return to the first call.
End Active
§Options§
¢
Conference.
§Options§
¢
End Conference
§Options§
to return to the first call.
Call.