General Specifications - Siemens Gigaset S675 IP Manual

Appendix
Handset operating times/charging times
The operating time of your Gigaset depends on the capacity and age of the bat-
teries and the way they are used. (All times are maximum possible times and
apply when the display backlight is switched off).
Standby time (hours)
Talktime (hours)
Operating time for 1.5 hrs of calls per day
(hours)
Charging time, base station (hours)
Charging time, charging cradle (hours)
At the time of going to print, batteries up to 900 mAh were available and had
been tested in the system. Due to the constant progression in battery develop-
ment, the list of recommended batteries in the FAQ section of the Gigaset Cus-
tomer Care pages is regularly updated:
www.gigaset.com/customercare
Base station power consumption
The power consumption for the base station is approx. 1.3 watt.

General specifications

Interfaces
No. of channels
Radio frequency range
Duplex method
Channel grid
Bit rate
Modulation
Language code
Transmission power
Range
Base station power supply 230 V ~/50 Hz
Environmental conditions
in operation
Codecs
Quality of Service
Protocols
202
600
130
7
70
6
5
Fixed line network, Ethernet
60 duplex channels
1880–11900 MHz
Time multiplex, 10 ms frame length
1728 kHz
1152 kbit/s
GFSK
32 kbit/s
10 mW, average power per channel
up to 328 yards outdoors, up to 55 yards indoors
+41°F to +113°F;
20% to 75% relative humidity
G.711, G.726, G.729AB with VAD/CNG, G.722
TOS, DiffServ
DECT, GAP, SIP, RTP, DHCP, NAT Traversal (STUN), HTTP
Capacity (mAh)
800 1000
175 220
10 12
90 115
9 11
7 8
1200
265
14
135
13
10