Chapter 4 Bios And Driver; Bios Settings - Vecow MTC-4015 User Manual

4
BIOS AND DRIVER

4.1 BIOS Settings

The board uses UEFI BIOS that is use Serial Peripheral Interface (SPI)
Flash. The SPI Flash contains the BIOS Setup program, POST, the PCI auto-
configuration utility, LAN, EEPROM information, and Serial port support. The
BIOS setup program is accessed by pressing the <Del> key after the Power-
On Self-Test (POST) memory test begins and before the operating system boot
begins. The menu bar is shown below.
Figure 4 1: BIOS Menu Bar
©Vecow MTC-4015 User Manual BIOS AND DRIVER SETTING 52