Video Conference Call Screen - Panasonic KX-VC1600SX User Manual

Preparation

Video Conference Call Screen

A
F
G
Other party's information
When using IP mode:
When registered in the contact list: The other party's name/IP address is displayed.
When not registered in the contact list: The other party's IP address, SIP URI (SIP user name@SIP domain
name), host name (e.g., hdvc.example.com), H.323 extension, H.323 name, MCU's conference room
number@IP address, or MCU's SIP user name@IP address is displayed. If the other party uses the same
SIP domain as you, only the SIP user name, and not the SIP URI, is displayed.
When using NAT Traversal Mode:
•
When registered in the contact list: The other party's name/connection number is displayed.
•
When not registered in the contact list: The other party's connection number is displayed.
Video Image
Displays the other party's video, your own video, or video from the secondary video input such as a
computer display or a sub video camera.
Subscreen
Depending on the screen layout, your own video or the other party's video is displayed here.
Duration
Displays the duration of the current video conference call.
Note
•
99h59m is displayed for the duration even if the length of the video conference call exceeds 100
hours.
Guide
Displays operations you can perform with the remote control.
Network Status Indication
The number of antennas in the icon indicates differing levels of network congestion.
The icon changes as follows:
0 bars ( ): The network is very congested or the bandwidth is insufficient at the connection point.
1 bar ( ): The network is congested.
2 bars ( ): The network is slightly congested.
3 bars ( ): The network is not congested.
40 User Manual
B
C
D
E
Document Version 2015-03