Calling from the Contact List (2-party Conference)
Note
•
To make a video conference call from the contact list, you must first register contacts in the contact list
(Page 88).
•
If "IP Address" is set to "Auto" on the network settings screen (Page 99), the unit's IP address will
be automatically obtained using a DHCP server, and therefore may change to a different IP address
from the one registered in the other party's contact list. In such cases, when the other party tries to call
you by selecting a registered IP address from their contact list, the call will not be connected. For details,
contact your network administrator.
1
Press [MENU].
•
The Menu screen is displayed.
2
Select "Contact List" using [
[ENTER].
•
The contact list screen is displayed. The entries are
grouped in the index tabs and displayed in
alphabetical order of "Site".
Note
•
If you press [Y], entries are displayed in the
speed dial number order.
Document Version 2015-03
][
] and press
Starting a Video Conference
1
2, 3
4
5
User Manual
47