Video Conference Call Screen - Panasonic KX-VC300 Operating Instructions Manual

Preparation

Video Conference Call Screen

A
F
G
Other party's information
When registered in the contact list: The other party's name/group name is displayed.
When not registered in the contact list: The other party's IP address, SIP URI (SIP user name@SIP domain
name), host name (e.g., www.example.com), MCU's conference room number@IP address, or MCU's SIP
user name@IP address is displayed. If the other party uses the same SIP domain as you, only the SIP
user name, and not the SIP URI, is displayed.
Video Image
Displays the other party's video, your own video, or video from the secondary video input such as a
computer display or a sub video camera (Page 69, Page 76).
Subscreen
Depending on the screen layout, your own video or the other party's video is displayed here (Page 51,
Page 53, Page 56).
Duration
Displays the duration of the current video conference call.
Note
•
99h59m is displayed for the duration even if the length of the video conference call exceeds 100
hours.
Guide
Displays operations you can perform with the remote control.
Network Status Indication
The number of antennas in the icon indicates differing levels of network congestion.
The icon changes as follows:
0 bars ( ): The network is very congested.
1 bar ( ): The network is congested.
2 bars ( ): The network is slightly congested.
3 bars ( ): The network is not congested.
Note
•
If the icon shows only 0–1 bars continuously, contact your network administrator.
•
During multiple-party video conference calls, the icon is displayed on each site screen, but not on
your own image.
34 Operating Manual
B
C
D
E
Document Version 2012-03