"Medium" [default] or "High") of an outgoing call
ring.
"Ring Tone Vol.": Press [ENTER] and use [
[
] to select the volume level ("OFF", "Low",
"Medium" [default] or "High") of an incoming call
ring.
"Ringback Tone": Press [ENTER] and use [
[
] to select the calling sound pattern ("Pattern
1" to "Pattern 5") (default: "Pattern 1").
"Ring Tone": Press [ENTER] and use [
select the incoming call sound pattern ("Pattern
1" to "Pattern 5") (default: "Pattern 1").
"Default Sound Lev.": Use [
volume level (0–20) at the start of a video
conference call (default: 16).
"Sound Pre-sets": Press [ENTER] and use [
[
] to select the tone ("More Highs",
"Standard" [default], "More Lows", "Voice" or
"Music") at the start of a video conference call.
Note
•
You can listen to a sample of the following
items by pressing [R].
–
"Welcome Screen Vol."
–
"Ringback Tone Vol."
–
"Ring Tone Vol."
–
"Ringback Tone"
–
"Ring Tone"
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [
][
] to select "Yes" and press [ENTER].
•
The system settings screen is displayed.
Setting the MIC Position
You can specify where a Digital Boundary Microphone
is conceptually positioned relative to the display. When
sounds are transmitted to another party, they are played
in accordance with the specified positions, which
creates a stereo environment.
Setting the MIC Position
automatically
1.
Select "MIC Setting" and press [ENTER].
•
The auto settings screen is displayed.
Document Version 2015-03
]
2.
]
3.
][
] to
][
] to select the
]
Setting the MIC Position manually
1.
2.
3.
4.
Note
•
If the manual settings screen is displayed,
press [B] to return to the auto settings
screen.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
Use [
][
] to select "Yes" and press [ENTER].
•
The system settings screen is displayed.
Note
•
Depending on how many Digital Boundary
Microphones are connected, the output
settings differ as follows:
–
2 or more Digital Boundary
Microphones: Monaural output
–
1 Digital Boundary Microphone: Stereo
output
•
When using Digital Boundary Microphones
and an Analogue Boundary Microphone
together, the output for all Boundary
Microphones will be monaural.
Select "MIC Setting" and press [ENTER].
•
The auto settings screen is displayed.
Note
•
If the manual settings screen is displayed,
proceed to step 3.
Press [B].
•
The manual settings screen is displayed.
Use [
][
] to select the Digital Boundary
Microphone you want to configure and press
[ENTER].
Use [
][
] to select the Digital Boundary
Microphone's relative position.
"Left side": Sounds on left side are played.
"Right side": Sounds on right side are played.
"Center Mono": All sounds are played through
both the left and right speakers at the same volume.
"Center stereo": Sounds centred on the
microphone are played through both the left and
right speakers at the same volume.
Contacts and Settings
User Manual
105