Contacts and Settings
•
The DNS server setting is necessary to use
the following features.
–
Call by specifying the host name
–
Setting the SIP server or gatekeeper
address by host name
–
Checking for software updates
–
Downloading the latest version over the
network
"Primary DNS Server": Enter the IP address of the
primary DNS server.
"Secondary DNS Server": Enter the IP address of
the secondary DNS server.
Note
•
"Primary DNS Server" and "Secondary
DNS Server" can be entered only if "DNS
Server" is set to "Manual".
•
If the value for "Primary DNS Server" or
"Secondary DNS Server" contains 1 or 2
digits numbers, enter these numbers as
they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
3.
To change the settings for LAN1: Press [G].
•
A dialogue box to confirm the saving of settings
is displayed, so save the settings here.
To change the settings for LAN2: Press [R].
•
The second page is displayed.
Making LAN2 Settings (KX-VC1600 only)
4.
Use [
][
] to select the following items for input:
"LAN 2": select "ON" or "OFF" (default) for LAN2.
"IP Address": Input the IP address for LAN2.
"Subnet mask": Input the subnet mask for LAN2.
Note
•
If the IP address or subnet mask contains 1
or 2 digit numbers, enter these numbers as
they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
•
If "ON" is not set for "LAN 2", "Routing
Settings" will not be displayed. Once "LAN
2" is set to "ON", press [G] to save the
settings and close the setting screen. Then,
select "Network Settings" and set the
routing.
Routing settings for LAN2 (KX-VC1600 only)
100
User Manual
5.
Use [
][
] to select "Routing Settings" and
press [ENTER].
•
The routing list screen is displayed.
6.
Use [
][
] to select "Not Registered".
7.
Press [B].
•
The routing settings screen is displayed.
8.
Use [
][
] to select the following items for input:
"Destination": Input the IP address of the other
party to communicate with using LAN2.
"Subnet mask": Input the subnet mask of the other
party to communicate with using LAN2.
"Gateway": Input the gateway address for
communication with other parties that have been
set.
Note
•
If "Destination", "Subnet mask", or
"Gateway" contains 1 or 2 digit numbers,
enter these numbers as they are. Do not
enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
9.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
10.
Use [
][
] to select "Yes" and press [ENTER].
•
The routing list screen is displayed.
Note
•
To continue setting another routing, repeat
steps 6–10.
•
The input "Destination" is converted to a
network address and then used. There is no
need to register multiple destination IP
addresses that have the same network
address.
11.
Press [BACK].
•
The system settings screen is displayed.
Making Connection Settings
Note
•
You can use the administrator menu to hide the
connection settings screen (Page 125).
Document Version 2015-03