Setting Local Site Selection; Exporting Data - Panasonic KX-VC1600SX User Manual

Contacts and Settings
–
"—": The shortcut key is not set.
–
"Network Settings": The shortcut is set to the
network settings screen.
–
"Call set up": The shortcut is set to the
communication settings screen.
–
"Language Setting": The shortcut is set to the
language settings screen.
–
"Network Test": The shortcut is set to the
network check screen.
Note
•
Items set to "OFF" in "GUI Settings" are
also displayed.
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The administrator menu screen is displayed.

Setting Local Site Selection

1.
Select "Select local site set" and press [ENTER].
•
The local site selection settings screen is
displayed.
2.
Use [ ][ ] to select the following items for input:
"Same setting after restart": Select whether to
use the same local site after restarting.
–
"ON": The local site settings made before
restarting will be retained.
–
"OFF" (default): The local site settings made
before restarting will not be retained.
"Edit Local site": Select whether to enable the
editing feature on the select local site screen.
–
"ON" (default): The editing feature is enabled.
–
"OFF": The editing feature is disabled.
Note
•
If "OFF" is selected, you cannot add, edit,
or delete a local site.
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [ ][ ] to select "Yes" and press [ENTER].
•
The administrator menu screen is displayed.
126 User Manual

Exporting Data

The call log, operation log, and contacts list can be
saved on a USB memory device. The saved operation
log can be used to specify the cause when problems
occur. For details, contact your dealer.
Note
•
A mass storage class (FAT16 or FAT32 format)
compatible USB memory device can be used
with this unit.
•
The following types of USB memory devices
cannot be used:
–
U3 smart drives (USB memory devices
compatible with the U3 platform)
–
USB memory devices with security features
–
USB memory devices formatted using
NTFS
–
USB memory devices with multiple LUNs
(Logical Unit Numbers)
–
USB memory devices formatted with
multiple partitions
•
USB memory devices are not guaranteed to
fully operate. For details, contact your dealer.
•
To re-connect a USB memory device, make
sure to fully remove the USB memory device
before connecting it again.
•
Confirm the USB memory device has sufficient
free space (at least 50 MB) before using it.
1.
Connect the USB memory device to the USB jack
on the back of the unit (Page 19).
Note
•
Make sure that the USB memory device is
connected correctly.
2.
Select "Export data" and press [ENTER].
•
The data export screen is displayed.
3.
Press [ENTER].
•
The data export begins.
Document Version 2015-03