5.2 Control elements
5.2.1 Pulse Control Switch
5.2.2 Stroke length adjustment knob
5.2.3 Multifunctional switch
Overview of equipment and control elements
Fig. 4
1
Pulse Control Switch
2
Stroke length adjustment knob
3
Fault indicator (red)
4
Warning indicator (yellow)
5
Operating indicator (green)
6
Multifunctional switch
7
"External control" terminal
8
Relay connection (optional)
9
"Level Switch" terminal
In Extern Contact operating mode via the pulse control switch a single
contact (at the "external control" terminal) can be used to trigger a series
of strokes or to support an incoming series of contacts.
The stroke length adjustment knob can be used to adjust the stroke
length.
The multifunctional switch can be used to set the following functions, oper‐
ating modes and stroke rate.
The operating modes that can be set are:
Test (priming function)
n
Stop
n
Extern (Contact)
n
Manual (setting stroke rate in 10 % increments)
n
1
2
3
4
5
6
7
8
9
P_BE_0011_SW
17