Advertisement
[ ]
Using 2-56 X 5/16 flat head screws, #2 internal tooth lock washers, and 2-56 hex nuts,
secure the tab part of the latch assembly to each side of the top shell. The tab goes on
the outside and with the protrusion on the tab extending beyond the top shell edge
as shown in the detailed photo.
[ ]
Using 2-56 X 5/16 flat head screws, #2 internal tooth lock washers, and 2-56 hex nuts,
secure the latch part of the latch assembly to each side of the bottom shell as shown in the
photo.
- Figure 59 -
- Figure 61 -
- Figure 62 -
46
- Figure 60 -
Advertisement
