NORCAL 2N2/XX Assembly Manual page 42

[ ] SPKR (Speaker) - Cut 4 inch pieces of wire in colors White and Green. Strip 1/8 inch of
insulation from each end and carefully tin. Solder the White wire to the SPKR left pad and the
Green wire to the SPKR right pad.
Your PCB should look like that shown in the next figure.
[ ] Volume (R80) - Cut 1 1/2 inch pieces of wire in colors White, Green, and Black. Strip 1/8 inch
of insulation from each end and carefully tin. Solder the Black wire to the Volume left pad, the
Green wire to the Volume center pad, and the White wire to the Volume right pad as viewed
from the closest PCB edge.
Your PCB should look like that shown in the next figure.
- Figure 50 -
- Figure 51 -
42