Aux Control; Digital I/O; Special Functions; Recording Status - Bosch Autodome IP 4000 HD Software Manual

54 en | Operation via the browser
12.1.4

AUX Control

Show scene
Click this button to display a preset scene.
Set scene
Click this button to set a preset scene.
AUX on
Click this button to activate an AUX command.
AUX off
Click this button to deactivate an AUX command.
12.1.5

Digital I/O

Input 1
This parameter identifies the first alarm input.
Input 2
This parameter identifies the second alarm input.
Output 1
Click the checkmark icon to enable the output. The checkmark becomes green.
12.1.6

Special Functions

Tour A / Tour B
Click one of these buttons to start the continuous playback of a recorded (guard) tour. A
recorded tour saves all manual camera movements made during the recording, including its
rate of pan, tilt and zoom speeds, and other lens setting changes.
To stop a tour, click a directional control in the View Control tab.
Find home
Click this button to trigger the camera to seek its home position. The OSD displays the
message, "OSD: Finding Home Position."
Focus
Click this button to activate the Auto Focus mode on the camera.
The OSD displays the message, "OSD: Camera [number] / Auto Focus: ONE PUSH."
Nightmode
Click this button to activate/deactivate night mode for the camera. After a few seconds, the
camera switches modes.
12.1.7

Recording status

The hard drive icon
The icon lights up and displays a moving graphic to indicate a running recording. If no
recording is taking place, a static icon is displayed.
12.1.8

Saving snapshots

Individual images from the displayed live video stream can be saved locally in JPEG format on
the computer's hard drive.
–
2015.04 | .07 |
below the live camera image changes during an automatic recording.
Click the photo camera icon
– The storage location depends on the configuration of the camera.
to save a single image.
Software Manual
AUTODOME IP 4000 HD / AUTODOME
IP 5000 HD / AUTODOME IP 5000 IR
Bosch Security Systems