Sectors; Miscellaneous; Illuminator - Bosch Autodome IP 4000 HD Software Manual

AUTODOME IP 4000 HD / AUTODOME
IP 5000 HD / AUTODOME IP 5000 IR
8.
9.
10. To view a scene in the preview window, select the scene in the list and click the button
11. To view a scene from the LIVE page:
To define a preposition tour:
1.
2.
3.
4.
5.
6.14

Sectors

Sector
The camera's pan capability is 360° and is divided into 16 equal sectors. This section allows
you to apply a title for each sector and to designate any sectors as a Blanked Sector.
To define a title for sectors:
1.
2.
3.
6.15

Miscellaneous

Fast address
This parameter allows the appropriate camera to be operated via the numerical address in the
control system. Enter a number between 0000 and 9999, inclusive, to identify the camera.
6.16

Illuminator

Note: This menu page is valid for AUTODOME IP 5000 IR only.
IR mode
By default, the camera is set to automatic illuminator mode (Auto). To deactivate this mode,
select Off.
IR near intensity limit
Select the limit (percentage) of intensity for IR at near focus range. Values range from 0 to 100
(default).
Bosch Security Systems
To delete a scene from the list, select the scene and click the button Delete scene
( ).
To overwrite an existing scene:
– Use the PTZ controls to navigate to the new scene.
– In the Scene list, select the scene that you want to overwrite.
– Click the button Overwrite scene (disk icon) to apply the new scene to the existing
preposition.
– To change the name of the scene, double-click the scene in the list. Then, change the
name in the dialog box Edit Scene and click OK.
Show scene (eye icon).
– Click a scene number in the Scenes list.
OR
– Use the keypad and the button Show scene in AUX Control.
Create the individual scenes.
By default, all scenes in the Preposition list are in the preposition tour.
To remove a scene from the tour, select the scene in the list and uncheck the Include in
standard tour box.
Select a dwell time from the Standard preposition tour drop-down list.
To start the preposition tour:
Return to the LIVE page.
Click the Aux Control tab.
Type 8 in the input box and click the Aux On button.
To stop the tour, type 8 and click the Aux Off button.
Place the cursor in the input box to the right of the sector number.
Type a title for the sector, up to 20 characters long.
To blank the sector, click the check box to the right of the sector title.
Software Manual
Camera | en 29
2015.04 | .07 |