Scene Mode Scheduler; Encoder Profile - Bosch Autodome IP 4000 HD Software Manual

AUTODOME IP 4000 HD / AUTODOME
IP 5000 HD / AUTODOME IP 5000 IR
Intelligent DNR
Select On to activate intelligent Dynamic Noise Reduction (DNR) which reduces noise based
on motion and light levels.
Temporal noise filtering
Adjusts the temporal noise filtering level between -15 and +15. The higher the value, the more
noise filtering.
Spatial noise filtering
Adjusts the spatial noise filtering level between -15 and +15. The higher the value, the more
noise filtering.
Intelligent Defog
With the Intelligent Defog mode feature, visibility can be improved significantly when viewing
foggy or other low-contrast scenes.
Select Auto to activate the Intelligent Defog feature automatically as needed.
Select Off to disable the feature.
Note: When the camera is in an indoor room that often has smoke or has low-contrast and the
camera monitors an area facing the outdoors (such as large windows), Bosch recommends to
select option Auto.
6.6

Scene Mode Scheduler

The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
2.
3.
6.7

Encoder Profile

For the video signal encoding, you can select a code algorithm and you can change the presets
for the profiles.
You can adapt the video data transmission to the operating environment (for example network
structure, bandwidth, data load). To this end, the camera simultaneously generates two data
streams (Dual Streaming), which compression settings you can select individually, for example
one setting for transmissions to the Internet and one for LAN connections.
Pre-programmed profiles are available, each giving priority to different perspectives.
You can change individual parameter values of a profile and you can also change the name.
You can switch between profiles by clicking the appropriate tabs.
Note: In the default setting, Stream 1 is transmitted for alarm connections and automatic
connections.
Notice!
All parameters combine to make up a profile and are dependent on one another. If you enter a
setting that is outside the permitted range for a particular parameter, the nearest permitted
value will be substituted when the settings are saved.
Bosch Security Systems
Select from the drop-down box Day mode the mode that you wish to use during the day.
Select from the drop-down box Night mode the mode that you wish to use during the
night.
Use the two slider buttons to set the Time ranges.
Software Manual
Camera | en 21
2015.04 | .07 |