Recording Profiles - Bosch Autodome IP 4000 HD Software Manual

32 en | Recording
4.
5.
Caution!
If older recordings are not allowed to be overwritten when the available memory capacity has
!
been used, the recording in question will be stopped. You can specify limitations for
overwriting old recordings by configuring the retention time (see Retention Time).
Formatting Storage Media
You can delete all recordings on a storage medium at any time.
Caution!
Check the recordings before deleting and back up important sequences on the computer's
!
hard drive.
1.
2.
3.
4.
Deactivating Storage Media
You can deactivate any storage medium from the Managed storage media list. It is then no
longer used for recordings.
1.
2.
7.2

Recording Profiles

A recording profile contains the characteristics of the tracks that are used for recording. These
characteristics can be defined for ten different profiles. The profiles can then be assigned to
days or times of day on the Recording Scheduler page.
Each profile is color-coded. The names of the profiles can be changed on the Recording
Scheduler page.
To configure a profile click its tab to open its settings page.
–
–
–
Stream profile settings
Select the encoder profile setting that is to be used with stream 1 and 2 when recording. This
selection is independent of the selection for live stream transmission. (The properties of the
encoder profiles are defined on the Encoder Profile page.)
2015.04 | .07 |
Check the box in the Rec. 1 or Rec. 2 to specify which data stream should be recorded
on the storage media selected. Rec. 1 stores Stream 1, Rec. 2 stores Stream 2. This
means that you can record the standard data stream on a hard drive and record alarm
images on the mobile CF card, for example.
Check the boxes for the Overwrite older recordings option to specify which older
recordings can be overwritten once the available memory capacity has been used.
Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2.
Click a storage medium in the Managed storage media list to select it.
Click the Edit button below the list. A new window will open.
Click the Formatting button to delete all recordings in the storage medium.
Click OK to close the window.
Click a storage medium in the Managed storage media list to select it.
Click the Remove button below the list. The storage medium is deactivated and removed
from the list.
To copy the currently visible settings to other profiles, click Copy Settings. A window
opens to select the target profiles for the copied settings.
If you change a profile's settings, click Set to save.
If necessary, click Default to return all settings to their factory defaults.
Software Manual
AUTODOME IP 4000 HD / AUTODOME
IP 5000 HD / AUTODOME IP 5000 IR
Bosch Security Systems